Electric CNC Metal Gear Pump Refueling Pump Smoke Pump For RC Airplane

Model gasoline engine all metal CNC high-end refueling pump CNC metal gear refueling pump refueling pump

The smoke pump adopts a high-voltage motor that can supply 4-12V power
Direction: Switching between forward and reverse rotation
Size: 115mm in length and 30mm in diameter
Oil nozzle: diameter 4mm
Voltage: 4-12V (available with 3S battery)
Plug: XT60
Flow rate: 800m1 per minute
Lift: 1.5 meters
Weight: 130 grams

Features:
1. All metal gear pump with long service life
2. Fully enclosed design for safer oil pumping
3. Built in voltage stabilizing power supply protection module to protect the motor
4. Waterproof three-stage switch with forward and reverse design, capable of pumping and pumping
5 wide voltage inputs 4-12V input, T-plug XT60 plug optional
6. Adopting polyurethane sealing ring, universal for gasoline, methanol, and diesel

matters needing attention:
1. Gear pump is a precision instrument, and any small impurity in the gear during high-speed operation may cause the oil pump to malfunction,

Therefore, when pumping oil, please ensure that the oil is clean and free of impurities, or install an oil filter on the oil pipe. 2. Do not idle for a long time or pump oil with high temperature,

To avoid oil leakage caused by accelerated aging of the sealing ring

3. Do not disassemble the oil pump without permission. Any improper operation during disassembly and reassembly will create gaps and cause air leakage, which will prevent the oil from being pumped